Traxxas

PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)

Traxxas

Screws, 3x6mm cap-head machine (hex drive) (6 pcs)

Traxxas

Header screws, 3x23mm cap hex screws (6 pcs)

Traxxas

Screws, 3x6mm button-head machine (hex drive) (6 pcs)

Traxxas

Screws, 3x12mm button-head machine (hex drive) (6 pcs)

Traxxas

Head screws, 3x12mm cap-head machine (hex drive) (6 pcs) (TRX 2.5, 2.5R, 3.3)

Traxxas

Heat shield tubing, fibreglass (2 pcs) (Black)

Traxxas

Cable ties, Medium (Black) (6 pcs)

Traxxas

Cap-head screws 3x10mm (6 pcs)

Traxxas

Glow plug, super-duty (Long-Medium) / gasket

Traxxas

Cone, split beveled

Traxxas

Screws, 3x28mm cap-head machine (hex drive) (6 pcs) / 3x6mm ELW (6 pcs)

Traxxas

Shoulder screws, 3x10mm (6 pcs) (with threadlock)

Traxxas

Spring, throttle return (2 pcs) (Jato, T-Maxx 2.5R, 3.3)

Traxxas

Clutch bell, (16-tooth) / 5x8x0.5mm fibre washer (2 pcs) / 5mm e-clip (requires #2728 - ball bearings, 5x8x2.5mm (2 pcs)

Traxxas

Clutch bell, (18-tooth) / 5x8x0.5mm fibre washer (2 pcs) / 5mm e-clip (requires #4609 - ball bearings, 5x10x4mm (2 pcs))

Traxxas

Clutch bell, (20-tooth) / 5x8x0.5mm fibre washer (2 pcs) / 5mm e-clip (requires #4611-ball bearings, 5x11x4mm (2 pcs)

Traxxas

Clutch bell, (22-tooth) / 5x8x0.5mm fibre washer (2 pcs) / 5mm e-clip (requires #4611-ball bearings, 5x11x4mm (2 pcs))

Traxxas

Clutch bell, (24-tooth) / 5x8x0.5mm fibre washer (2 pcs) / 5mm e-clip (requires #4611-ball bearings, 5x11x4mm (2 pcs))

Traxxas

Flywheel (N. Rustler / Sport / Stampede / T-Maxx / Revo / Jato)

Traxxas

Flywheel, (larger, knurled for use with starter boxes) (TRX 2.5 and TRX 2.5R) (Silver anodised)

Traxxas

Adapter nut, clutch (not for use with IPS Crankshafts)

Traxxas

Clutch shoes (2 pcs) / spring (N. Rustler / N.Sport / N.Stampede)

Traxxas

Clutch shoes (2 pcs) / spring (T-Maxx / Revo / Jato / Nitro 4-Tec)

Traxxas

Engine mount, 2 piece, aluminium (with screws) (N. Stampede)

Traxxas

TRX Pro.15 to TRX 2.5 / 2.5R upgrade kit for Nitro Rustler, Nitro Sport (incl. SE), and Nitro Stampede

Traxxas

Tuned pipe, assembled (N. Rustler, N. 4-Tec, N. Sport style) (TRX 2.5, 2.5R) (replaces 4452)

Traxxas

Engine mount, 2 piece, aluminium (with screws) (N. Rustler / Sport)

Traxxas

Connector, wiring harness (EZ-Start and EZ-Start 2)

Traxxas

Connector, wiring harness (EZ-Start and EZ-Start 2)

Traxxas

Box, control

Traxxas

Lead wire, glow plug (Blue) (EZ-Start and EZ-Start 2)

Traxxas

Lead wire, glow plug (Blue) (EZ-Start and EZ-Start 2)

Traxxas

Adapter nut, clutch / 3x10mm cap scre with washer / split washer (not for use with IPS Crankshafts)

Traxxas

Screws, Set (grub) 4mm (6 pcs) (with threadlock)

Traxxas

Pro.15 to TRX 2.5 / 2.5R upgrade kit for T-Maxx

Traxxas

Coupler, exhaust (silicone)

Traxxas

Header, aluminium (T-Maxx) (for Rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)

Traxxas

Screws, 3x15mm cap-head machine (hex drive) (with split and flat washers) (6 pcs)

Traxxas

Grease, White lithium

Traxxas

Tuned pipe, plastic (TRX 2.5, 2.5R, 3.3)

Traxxas

Engine mount, aluminium / 3x10 CS with washers (8 pcs)

Traxxas

Screws, 2.6x8mm countersunk machine (6 pcs)

Traxxas

Roller clutch / 6x8x0.5 TW (1pc) (also called one-way bearing) (TRX 2.5, 2.5R, 3.3)

Traxxas

O-ring, backplate 20x1.4mm (TRX 2.5, 2.5R)

Traxxas

Clutch bell, (14-tooth) / 5x8x0.5mm fibre washer (2 pcs) / 5mm e-clip (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)

Traxxas

Clutch bell, (15-tooth) / 5x8x0.5mm fibre washer (2 pcs) / 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Traxxas

Clutch bell, (16-tooth) / 5x8x0.5mm fibre washer (2 pcs) / 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Traxxas

17-T Clutch bell

Traxxas

Ball bearings, 7x17x5mm (1pc) / 12x21x5mm (1pc) (TRX 3.3, 2.5R, 2.5 engine bearings)

Traxxas

Rod, connecting (TRX 2.5, 2.5R, 3.3)

Traxxas

Head protector, cooling head (2 pcs) (TRX 2.5, 2.5R)

Traxxas

Gaskets, cooling head: 0.15, 0.25, 0.35mm (1 each) (TRX 2.5, 2.5R)

Traxxas

Piston / sleeve (matched Set), wrist pin clips (2 pcs) (TRX 2.5, 2.5R)

Traxxas

Wrist pin / wrist pin clips (2 pcs) (TRX 2.5, 2.5R)

Traxxas

Carburetor Body / fuel inlet plug / 5x.9mm O-ring (1-each) (TRX 2.5, 2.5R)

Traxxas

Wrist pin clips (3 pcs) (TRX 2.5, 2.5R)

Traxxas

Head, water-cooled marine (TRX 2.5, TRX 2.5R)

Traxxas

Screw, idle speed / 2x1mm O-ring (1-each) (TRX 2.5, 2.5R)

Traxxas

Dust boot, throttle (2 pcs) / return spring (TRX 2.5, 2.5R)

Traxxas

Throttle arm, carburetor / 3mm Set screw (1-each) (TRX 2.5, 2.5R)

Traxxas

Flywheel nut (TRX 2.5, 2.5R, 3.3)

Traxxas

Exhaust Deflecter & Coupler Set

Traxxas

Pipe coupler, moulded (for use with pipes 5152 (T-Maxx) & 4452R) (TRX 2.5, 2.5R, 3.3)

Traxxas

O-ring and seal Set, carburetor / O-rings: 2x1mm (3 pcs), 10x1mm (4 pcs), 2.5x1.15mm (2 pcs), 6.2x1.2mm (1pc) / 5x.9mm O-ring installation tool / 5.3x7.8x.6mm crush washer (2 pcs) / carburetor dust boot (1pc) (TRX2.5, 2.5R)

Traxxas

Needle assembly, high-speed (with fuel fitting) / 2.5x1.15mm O-ring (2 pcs) / 5.3x7.8x.6mm crush washer (2 pcs) (TRX 2.5, 2.5R)

Traxxas

Carburetor, complete (minus air filter assy) (TRX 2.5, 2.5R composite slide)

Traxxas

O-ring, header 12.2x1mm (TRX 2.5, 2.5R, 3.3)

Traxxas

Air filter housing / foam insert / straight base / angled base / cable tie (1-each) (TRX 2.5, 2.5R, 3.3)

Traxxas

Air filter inserts, foam (3 pcs) (pre-oiled) (TRX 2.5, 2.5R, 3.3)

Traxxas

Oil, air filter

Traxxas

Air filter housing / foam insert / Revo-Slayer air filter base (angled) / cable tie (1-each) (TRX 2.5, 2.5R)

Traxxas

Air filter housing / foam insert / Jato air filter base (Long, straight) / cable tie (1-each) (TRX 2.5, 2.5R, 3.3)

Traxxas

EZ-Start 2, complete system with controller, drive unit, wiring harness

Traxxas

Cush-drive elements (4 pcs) (EZ-Start 2)

Traxxas

Backplate / 20x1.4mm O-ring (for engines with starter) (TRX 2.5, 2.5R)

Traxxas

Housing Set (inner, outer) / 3x12mmBCS (5 pcs) / 3x20BCS (1pc) / motor bushing (EZ-Start 2)

Traxxas

Gear Set (complete) (EZ-Start 2)

Traxxas

Shaft, starter (TRX 2.5, 2.5R, 3.3)

Traxxas

Motor / Pinion Gear gear / motor bushing (EZ-Start 2)

Traxxas

Control box (complete) (EZ-Start 2)

Traxxas

Control box battery cover with belt clip (EZ-Start 2)

Traxxas

Screws, 3x12mm button-head machine (6 pcs) (Starter attachment screws with Threadlock)

Traxxas

Header, Blue-anodised aluminium (for Rear exhaust engines only) (TRX 2.5, 2.5R, 3.3)

Traxxas

Header, exhaust (tubular aluminium, Silver-anodised) (TRX 2.5, 2.5R, 3.3)

Traxxas

Engine mount (complete assembly) / 3x28mm CS with washers (2 pcs) / 3x10 CS with washers (10 pcs)

Traxxas

Big block Installation kit (engine mount and required hardware)

Traxxas

Set screw, throttle 3x15 (1pc)

Traxxas

Engine mount, (Revo Big Block Kit)

Traxxas

Bellcrank mounts, throttle (Long & Short)

Traxxas

Flywheel Nut 1 / 4-28 thread (for big blocks with SG shafts)

Traxxas

Hanger, Revo big block kit (Black)

Traxxas

Spring, header (for Revo big block header) / o-ring (1pc) & gasket (1pc) (for exhaust header flange)

Traxxas

Header, exhaust (Jato) (tubular aluminium, Clear anodised) (TRX 2.5, 2.5R, 3.3)

Traxxas

Engine mount / engine mount spacers (2 pcs) / 3x15 CS with washers (4 pcs) / 4x18 BCS (2 pcs) / flat-head engine mount screws 3x10 (2 pcs)

Traxxas

Flywheel with magnet (35mm)

Traxxas

Ball bearings (5x8x2.5mm) (2 pcs)

Traxxas

Fuel line (1 foot)

Traxxas

Fuel line (610mm or 2ft)

Traxxas

Glow plug wrench (universal wrench)

Traxxas

Spring, throttle return (2 pcs) (Nitro 4-Tec)

Traxxas

Spring, throttle return (2 pcs) (Revo / Slayer)

Traxxas

Ball bearings (5x10x4mm) (2 pcs)

Traxxas

Ball bearings (5x11x4mm) (2 pcs)

Traxxas

Bottle, fuel filler (500cc)

Traxxas

Rebuild kit, fuel filler bottle (includes bottle lid (1pc) and dispensing tube caps, rubber (2 pcs) (fits 8mm or 5 / 16in dispensing tube))

Traxxas

Grease, White lithium

Traxxas

Starter, recoil (complete with screws) (TRX 2.5, 2.5R, 3.3)

Traxxas

Spool, recoil starter (TRX 2.5, 2.5R)

Traxxas

Pull string, recoil starter (TRX 2.5, 2.5R)

Traxxas

Housing Set, recoil starter / 2x3mm RST (2 pcs) (TRX 2.5, 2.5R)

Traxxas

Crankshaft, multi-shaft (for engines with starter) (with 5x15mm & 5x25mm inserts for Short and standard Crank lengths) (TRX 2.5, 2.5R, 3.3)

Traxxas

Cooling head, PowerTune (machined aluminium, Blue-anodised) (TRX 2.5 and 2.5R) / head protector (plastic)

Traxxas

Pipe coupler, moulded (Black) / exhaust deflecter (rubber, Black) / cable ties, Long (2 pcs) / cable ties, Short (2 pcs)

Traxxas

Oil, air filter

Traxxas

Backplate / 20x1.4mm O-ring (for engines without starter) (TRX 2.5, 2.5R, 3.3)

Traxxas

Big block Installation kit (engine mount and required hardware)

Traxxas

Tuned pipe, Resonator, R.O.A.R. legal (single-chamber, enhances low to mid-rpm power) (for Jato, N. Rustler, N. 4-Tec with TRX Racing Engines)

Traxxas

Tuned pipe, Resonator, R.O.A.R. legal (dual-chamber, enhances mid to high-rpm power) (for Jato, N. Rustler, N. 4-Tec with TRX Racing Engines)

Traxxas

Resonator Tuned Pipe

Traxxas

Tuned pipe, Resonator, R.O.A.R. legal (single-chamber, enhances low to mid-rpm power) (for Revo & Slayer with TRX Racing Engines)