Baiting 2500 V2 Bait Boat 2.4G RTR With GPS

Baiting 2500 V2 Bait Boat 2.4G RTR With GPS

Elevate your angling strategy with the Baiting 2500 V2 Bait Boat, a high-performance radio-controlled vessel designed specifically for serious specimen anglers. Boasting a massive 2500-gram (2.5 kg) bait hopper capacity, this robust boat allows you to drop large beds of bait alongside your rig with absolute precision. Driven by a highly efficient brushless motor and ESC system, it cuts through the water smoothly at speeds of up to 1 metre per second, ensuring your gear reaches the zone quickly and quietly.

This advanced V2 model features an integrated GPS autopilot system operating on a secure 2.4GHz frequency with a range of up to 500 metres. The intelligent handset allows you to store four distinct fishing spots in its memory alongside a designated home location. With the 'One Button Return' feature, the boat will automatically navigate back to your home spot, allowing you to focus on your rods. The system is incredibly efficient, providing up to 2 hours of full autopilot driving or 1.5 hours of manual driving from a single charge, translated to over 14 bait drops per charge at a 150-metre range.

Designed for heavy use in all conditions, the boat features ultra-bright front and rear LED navigation lights for effortless night placement. The intelligent handset keeps you fully updated with a built-in boat battery power indicator and an automatic low-voltage flashing warning system, ensuring you never lose power at a distance.

How to release the bait

• Open boat cover, put LiFePo battery inside, fix it with velcro strap.
• Use battery plug to plug in receiver power connector.the light on the receiver turns on( remarks:The transmitter shall turns on before receiver turns on), then the control system is working.
• When the transmitter and receiver of the boat both turn on, rotate the knob on the transmitter to C. the lock pin at the rear will withdraw into the lock.
• Rotate the knob on the transmitter to B, the lock pin at the rear will extend to the end of the lock to lock the rear lock.
• Rotate the knob to A, use hand to close the door of the bait hopper.
• Put 2500 grams bait inside the hopper.
• Control the boat with 2500 grams bait to a spot 10 meters away from the shore. Press the button GPS (ON) on transmitter for 5 seconds. Meanwhile, the corresponding green light is on for GPS RETURN( indicate that the original spot is memorized, it is also called the return spot.
• Control the boat to a spot, rotate the knob on transmitter from A to B to open the the door, the bait will fall down in the water to attract fish to eat the bait at this spot.
• Press any one of the 4 POSITIONING buttons for 5 seconds, the green light will turn on ( The boat has memorized the coordinate of this spot). We can later remote control the boat with hook or bait to the spot again as long as we press the corresponding positioning button.If you want to cancel the positioning of one spot, press corresponding positioning button for 5 seconds.
• Press the button GPSRETURN) for 1 second, the boat will come back to the spot 10 meters from the nearest shore and stop there. As long as we pull or push the trigger or rotate the wheel from the transmitter, the boat will cancel return automatically and turn to be controlled by human. Once again if you want to start return automatically, you need to press GPSRETURNagain. then the boat will return automatically.The 4 green lights on the transmitter will flash if the Battery power is low, we need to control the boat back as soon as possible for the boat has remaining power to drive for 500-800 meters.

How to release the hook

• When the bait has already been delivered and released and the boat has returned back , we will control the bait boat to deliver the hook.