EnErG-Pro B-150 SBEC ESC (150A) (2-6 Cells)

Regular Price:

SRP £136.99


  • Output :Continuous Current 150A, Burst Current 200A for 10 seconds
  • Battery Cell :5-18NC/2-6Lipo
  • Weight :150g
  • BEC Output :5.0V,5.5V,6.0V adjustable/5A
  • Size :55x72x17mm(LxWxH)


  • Supports high RPM motors,can be used with most of the motors in the rc market
  • Secondary sub-menu setting ,is easier to be programmed
  • Adjustable BEC output 5.0V/5.5V/6.0V and Continuous 5A current (supplies the Servo with much stronger power)
  • Advanced Governor Mode ( has the B-Series ESC to keep the motor speed even though the load is changed)
  • More optional motor timing Setup and soft acceleration start ups ( make the motors run smoothly)
  • Super smooth and accurate throttle linearity
  • Power arming protection (prevents the motor from accidentally running when switched ON)
  • Auto throttle shut down in signal lose situation
  • Safety thermal over-load protection, when the temperature of ESC exceeds 110 deg C,the ESC will reduce the output power to allow it to cool
  • Use new generation of the MOSFET to ensure ESC's heating low,supporting biggest Peak current and higher reliability
  • New Advanced programming software
Key FeaturesBEC Output - 5.0-5.5 or 6.0v (ADJUSTABLE) At 5A
Continuous - 150A (Burst - 200A)
EnErG Pro B-150 SBEC
Lipo Cells - 2-6 (NiMH Cells - 5-18)
Program Card - 4404970
Programmable - Yes (Manually or by Program card not included)
Size - 55x70x17mm
Weight - 150g